Welcome: NINGBO CHANGWEI TECHNOLOGY & MATERIALS CO.,LTD.

PTFE Teflon Coated Fiberglass Adhesive Tape

  • Adhesive backed teflon sheet
  • Adhesive backed teflon sheet
  • Adhesive backed teflon sheet
  • Adhesive backed teflon sheet
Adhesive backed teflon sheetAdhesive backed teflon sheetAdhesive backed teflon sheetAdhesive backed teflon sheet

Adhesive backed teflon sheet

  • Brand: Changwei
  • Materials: PTFE,Fiberglass Fabric
  • Features:100% Nonstick, High Temp Resistant
  • Temp Resistance: -70°C to +260°C
  • Product description: Adhesive backed teflon sheet is Silicone adhesive coated on PTFE fabric (or pure PTFE membrane) which has been sodium treated on single side.
  • INQUIRY

Adhesive backed teflon sheet

The PTFE adhesive tape is Silicone adhesive coated on PTFE fabric (or pure PTFE membrane) which has been sodium treated on single side.

Features of Adhesive backed teflon sheet:

1. Temperature resistance from -70°C to +300°C, with climate resistance and aging resistance.

2. Superior non-stick surface, easy to clean.

3. Excellent chemical resistance. Be Resistant to strong acid, strong alkali, aqua regia and various organic solvents.

4. Non-toxic, and can resist almost all pharmaceutical products

5. High insulating property, anti-UV, anti-static.

6. Fire Proof

7. Easy to apply, long working life.

Applications of Adhesive backed teflon sheet:

1. Coating on all kinds of high temperature rollers, heating plates, stripping pieces.

2. Heat sealing for foods, medicines and plastic package.

3. Can be used repeatedly and easy to be replaced as liners of chutes, hoppers, and aero moulds, also on the sizing machine rollers and demoulding industry.

4. Adapted for the surface treatment of non-adhesive, chemical resistance and temperature resistance.

5. Used in packing, thermoplastic, composite, sealing heat binding, electrical and electronic industries.


Teflon tape roller replaces the traditional Teflon spray, which has the characteristics of convenience, low technical requirements and durability. To make the Teflon tape stick roller have a longer service life,

Pay attention to the following technical points:

1. Clean the surface of the drying cylinder that needs to be taped, pay attention to the surface without iron filings, and the surface is smooth.

2. Cut the tape longer than the required length (about 5 cm longer than the required length).

3, tear off the release paper, pay attention to tearing the edge paste, do not tear all at once, in the process of the paste can be used a piece of cloth (or newspaper) on the tape to flatten the friction, after the tape is finished to ensure both sides of the tape Rejoined together.

4. In the middle of the overlap of the tape, use a utility knife to draw a straight line (the length of the drying cylinder), tear off the A (as shown) with tape and open

5, after the paste, carefully check whether there are small bubbles between the tape and the drying cylinder, if any, you can use a sharp object such as a pin to exclude small bubbles, and flatten. Tape at B, to remove the tape at C, and finally stick B, and flatten the tape at B and D.

Teflon tape stick roller is mainly used in 0.13MM and 0.18MM thickness.


Physical Characteristic of Adhesive backed teflon sheet:

Characteristic

Unit

Value

Thickness

mm

.13

.18

.20

.25

inch

.005

.007

.008

.01

Width (Roll)

mm

13

19

25

50

inch

.50

.75

1

2

Length (Roll)

meter

10

33

yard

10.90

36

Color

--

Beige

Pack

--

Roll

Adhesive

--

Silicone

Heat Sealer

--

Good

Temperature Range

60~260

Peeling Strength

(Stainless steel plate)

25

N/10mm

3.18

250, 10minute

3.72

Tensile Strength

kg/cm2

283

Elongation

%

100

Breakdown Voltage

V

10,000

Friction Coefficient

--

0.6

Water Absorption

%

0.00

Oil and Chemical Resistance

--

Good

Flame Resistance

--

Good (UL510)