How to effectively extend the teflon conveyor belt reasonably?

Let us learn how to effectively extend the teflon conveyor belt reasonably?

1. The teflon conveyor belt is a machine that continuously transports materials by closing the endless conveyor belt. It has the advantages of high productivity, simple structure, stable and stable work, long conveying interval and low energy consumption. Therefore, it is widely used in mining, metallurgy, chemical, construction, light industry, port, station freight yards, etc. The conveyor belt of the teflon conveyor belt is both a traction construction for transmitting power and a load bearing construction for supporting materials. The outer surface of the teflon conveyor belt is generally rubber, and the outer rubber can protect the inner cushion (consisting of canvas layer or steel wire rope) from mechanical damage, moisture and improve the friction coefficient between the teflon conveyor belt and the drum. Once the rubber layer is damaged, the conveyor belt is easily damaged. To do this, we must protect it well and extend its useful life.

2, the installation meets the requirements

Whether the teflon conveyor belt installation meets the requirements is directly related to whether the teflon conveyor belt can operate normally and the service life of the teflon conveyor belt.

2.1 Drive Equipment The drive unit of the teflon conveyor belt consists of a motor, a reducer and a drum. It is required to maintain a certain level of level during installation. The shape of the middle of the drive roller brake is convex, and the convexity is 1/200 of the length of the drum to prevent the conveyor belt from running off.

2.2 When the supporting equipment supports the equipment, it consists of a roller frame and a roller. The distance of the upper roller group is generally 1m to 1.5m, and the distance of the lower roller group is 2m to 3m. If the distance is too large, the running resistance is increased, the wear is accelerated, and the service life of the teflon conveyor belt is reduced. In order to avoid the deviation of the conveyor belt, an active adjustment roller set must be installed every 5m to lOm.

3, the interface should be cemented

It is now analyzed by the speed and force conditions of a material in the unloading baffle. Use to indicate the angle between the unloading baffle and the longitudinal centerline of the conveyor belt. The mechanical connection of the teflon conveyor belt interface will affect the strength of the teflon conveyor belt and will easily damage the roller. Therefore, the teflon conveyor belt interface should be cemented. When the interface is cemented, the interface should be aligned to avoid the deviation of the teflon conveyor belt.

4, the hopper should be installed correctly

The unloading port of the hopper should not be too high from the outer surface of the teflon conveyor belt to avoid a large impact on the teflon conveyor belt. The discharge direction of the hopper should be as small as possible with respect to the normal velocity of the teflon conveyor belt. As close as possible to the tangential speed of the teflon conveyor belt, to avoid the large card from scratching the teflon conveyor belt at the discharge port; the material discharge at the feed port should be removed from the longitudinal centerline of the teflon conveyor belt to avoid the deviation of the teflon conveyor belt. Accelerate belt wear.



Contact: Miss Cassie

Phone: 0086 18395896609

Tel: 0086 18395896609

Email: service@teflonfiberglass.com

Add: Changwei Industrial Park, Yinzhou District, Ningbo City, Zhejiang Province, China. Zip code: 315100