How to inspect the position and solution for PTFE Teflon Fiberglass Open Mesh Fabric Conveyor Belts direction deviation?

Let us learn the PTFE Teflon Fiberglass Open Mesh Fabric Conveyor Belts direction deviation inspection position and solution!

(1) Check the misalignment between the horizontal axis of the idler roller and the vertical axis of the PTFE Teflon conveyor belt . If the misalignment value exceeds 3mm, you should use the long strip mounting holes on both sides of the idler group for adjustment. The specific method is which side of the PTFE Teflon conveyor belt is biased, which side of the idler group moves forward in the direction of the PTFE Teflon Fiberglass Open Mesh Fabric Conveyor Belts, or the other side moves to the right.

(2) Check the error values of the two planes of the head and tail card racks with seated bearings. If the error of the two planes exceeds 1mm, the two planes should be adjusted in the same plane. The adjustment method of the roller on the top of the head is: if the PTFE Teflon conveyor belt deviates to the right of the roller, the bearing with seat on the right side of the roller should move forward and middle or the bearing with seat on the left should move to the right; if the PTFE Teflon conveyor belt If it deviates to the left of the drum, the bearing with seat on the left of the drum should move forward or the bearing on the right should move to the right. The adjustment method of the tail drum is exactly the opposite of that of the head drum.

(3) Check the position of the material on the PTFE Teflon Fiberglass Open Mesh Fabric Conveyor Belts. The raw material is not vertically centered on the cross section of the PTFE Teflon conveyor belt, which will cause the direction of the conveyor belt to deviate. If the raw material deviates to the right, the Teflon conveyor belt deviates to the left, and vice versa. When applying, try to keep the material vertically centered. In order to reduce or prevent the direction deviation of this kind of Teflon conveyor belt, the baffle plate can be raised to change the orientation and position of the raw material.

Our brand WELLFLON ® mainly focus on the field of industrial coatings, the main products are PTFE Teflon coated fiberglass fabrics, PTFE Teflon adhesive tapes, PTFE Teflon conveyor belts, PTFE Teflon seamless belts and so on. The Brand COOKAFLON ® positions in civilian field of non-stick cookware and barbecue utensils,Such as PTFE Teflon Non-stick Baking or Grilling liners,Meshes, Bags, Baskets, etc. If you have any requests, please contact us without hesitation!